What To Do If The Automatic Carton Sealing Machine Gets Stuck?

1. The width or height adjustment is too small
The automatic carton sealing machine manually adjusts the corresponding width and height when transporting cartons. However, during the adjustment process, the operator is not familiar with the machine or makes operational errors, which may cause jamming of the cartons.
Solution: The best way is to place the carton on the work surface of the carton sealing machine, and then make comparison adjustments to ensure the conveying length.
2. The carton is too light and cannot pass through the movement.
The principle of the automatic carton sealing machine to seal the tape is to rely on the carton sealing machine to press the carton and hit the guide roller during the transportation process, thereby sealing the tape to the carton. However, if the carton is too light during this process, it will not hit the guide roller, which will directly lead to the phenomenon of box jamming.
3. The tape is not cut off
This will result in the cutter not being sharp enough to cut through the tape. If the tape continues to be cut, the carton will get stuck in the sealing machine and cannot be transported further.
Solution: Clean the cutter regularly or replace the cutter to ensure the sharpness of the cutter. (After the automatic carton sealing machine is used for a period of time, a lot of tape debris and dust will stick to the cutter, so it needs to be cleaned in time)